Pneumatic Riveting Machine

The riveting head rotates around the rivet centerline while simultaneously spinning under tangential force, producing smooth, burr-free rivet heads without cracking or deforming the surrounding material. This orbital action distributes forming force gradually, which is critical for assemblies with thin-walled or heat-sensitive components.

Supports solid rivets from 1–8 mm and hollow rivets from 1–20 mm in diameter, with a maximum rivet length of 200 mm. This range covers fastening tasks from small electronic enclosures to structural sheet metal joints, reducing the need for multiple dedicated machines on the shop floor.

The built-in multi-station rotary table allows operators to load, rivet, and unload parts in a continuous sequence. While one station is being riveted, the next is being loaded — minimizing downtime and keeping output rates high across shifts.

An integrated HMI control panel and foot pedal give operators full command over cycle timing and actuation. The adjustable 0–6 second cycle time accommodates different part geometries, while the emergency stop button provides immediate shutdown when needed.

Running on standard 380V power and 2–6 kg/cm² compressed air, the machine connects directly to existing factory utilities. At 140 kg with a compact footprint, it can be positioned at any workstation or integrated into an assembly cell without structural reinforcement.