There are three methods for cleaning the full-automatic roll-shear spiral air pipe machine:
https://www.bobomachine.com/products-1.html
The inner wall of the pipe of the full-automatic rolling and shearing type spiral air pipe machine is used for removing dirt. This method requires the air duct to have a large access hole so that operators can get it as much as possible, but this method is most likely to miss some dust and dirt because the air duct cannot form a complete negative pressure condition.
Duct Manufacturing Auto-line III
2. Dynamic washing full-automatic rolling and shearing type spiral air pipe machine: use pneumatic or electric brush to brush dirt, and then the dirt is sucked into the vacuum collector in the same method and direction as gas washing. This method requires as much care as possible so as not to damage the appearance of the full-automatic roll-shear spiral air pipe machine.
3. Gas flushing: This method delivers compressed air by means of a hose equipped with a nozzle connected to a fully automatic roll-shear spiral air pipe machine. The nozzle is designed so that compressed air can drive dust and dirt in. In our life, we often have various opportunities to contact with pipeline products. Life is closely linked, especially ventilation pipelines. In use, we should learn to maintain and clean the full-automatic rolling and shearing type spiral air pipe machine, so as to better play the role of the full-automatic rolling and shearing type spiral air pipe machine. The above is the effective cleaning method of the full-automatic roll-shear spiral air pipe machine.
