EN
EN

Contact Us

Email:[email protected]

Phone :+86 15962807500

Add :CBD, Nantong , JiangSu, China

  • /img/wheel-hub-air-tightness-testing-machine.jpg

Wheel Hub Air Tightness Testing Machine

INQUIRY

  • Specification

I.Summary

The equipment adopts hydraulic clamping method,Bubble method for testing. Hydraulic clamping tooling is used to seal the upper and lower end caps of the hub, and high-strength gaskets are used to seal the upper and lower ends.It hasthe advantages of high control accuracy, and the pressure can be adjusted steplessly.

II.Features 

1. Pneumatic test pressure: up to 0.6Mpa.

2. Clamping method: hydraulic clamping.

3. Detection method: air pressure bubbling method, direct pressure leak detector

4. Clamping tooling stroke: 200mm.

5. Pool stroke: 200mm.

6. The maximum height of the wheel placement space: 400mm.

7. The diameter range of the tested wheel hub: 150-400mm

III. Technical Data

No

Parameter

data

1

Test pressure

within 6bar

2

Pressure control accuracy

±0.5%

3

Pressure value resolution

0.1kpa

4

Pressure sensor

0.5level

5

Test medium

compressed air

6

Pressure control method

manual, touch screen

7

Operation mode

automatic

8

Relative humidity

<85%

9

Sample installation method

hydraulic clamping

10

Structure composition

pressure control system, hydraulic clamping system