EN
EN

Contact Us

Email:[email protected]

Phone :+86 15962807500

Add :CBD, Nantong , JiangSu, China

  • /img/production-line-of-wheel-rim-36.jpg

Production Line of Wheel Rim

INQUIRY

  • Specification

Wheel Rim Production Part

This production line is including wheel rim making production part and wheel cover hub production part ,there all are suitable for the manufacture wheel rims of bicycles and motorcycles,and battery vehicles.Through computer control ,it does not require manual operation, its useful for making large amount wheel rims with less people and get more consistency, productivity.

And its stable quality, multiple protection links, safe and reliable. 

I.Production Introduction 

1.Production process flow 

 decoiler→forming→perforating→rolling→cutting→welding

3.Forming work part:

main motor power:7.5kW

  diameter of main bearing for the roll :60mm

  material of main roll:CR12 quenching process Electroplating treatment

  Forming processing line:8 lines

  Touch screen control

  PLC control system

4.Cutting part:

Cutting Power: Hydraulic driven

  Cutting blade material: Cr12, with quenching

5. Welding machine:

Flash butt welder

Adjustment level :stepless adjustment

Welding stroke stroke:100mm

II.Detail introduction

The production line adopts PLC control and LCD touch screen.Operator automatically runs the system and monitors the control process through the set program (programmable control).Realize the operator to control the production line and modify the control parameters to achieve the length digital setting and adjustment. And real-time monitoring of equipment operating status, operating parameters and fault indications.There are two operation modes:manual and automatic.In the manual state,it`s able to single unit operation ,which is convenient for maintenance.In the automatic state,whole production line runs automatically,and starts sequentially.There are emergence stop buttons on whole production line,which are easy to handle the emergence accidents and ensure the safely of the equipment and operators.

III.Technical data

NO.

Item

Parameter

1

Main motor power

7.5kW

2

Thickness range

0.8mm-1.5mm

3

Diameter of roll bearing

60mm

4

Material of roll

Cr12 quenching

5

Maximum forming processing lines

8 lines

6

Control tool

Touch screen

7

Control system

PLC

8

MAX.Loading capacity of decoiler

2tons

9

MAX.Loading width of decoiler

300mm

10

Cutting system

Hydraulic control

11

Material of cutting blade

Cr12 quenching process

12

Adjustment level of welding part

stepless adjustment

13

Vertical work stroke of welding part

pneumatic

14

Propulsion method

Pneumatic

15

Total motor power

12kW

16

Material of polishing wheel

nylon