Contact Us

Email:[email protected]

Phone :+86 15962807500

Add :CBD, Nantong , JiangSu, China

  • /img/hp_spray_foam_machine_bdf_iv.jpg
  • /upfile/2019/01/18/20190118100326_653.jpg

Hp Spray Foam Machine BDF-IV



Payment: 30% down payment by T/T,the balance down before shipment.

Lead time: witin 10-35 days after receiving down payment.

Guarantee: within one year since date of B/L.



  • Specification

BDF-IV pneumatic high pressure pu foam spraying machine is design for sitework, with accuracy measuring, even mixing, moveable and portable structure and balance of cost and performance. The HP foam spraying machine is widely used for wall, roof, refrigerator, pipe insulation purpose.



1- Pneumatic motor

The pneumatic motor adopt the latest direction-change for double direction work, has more stable performance compare to electric one, suitable for complicated sitework condition.

2- High precision proportion pump

The proportion pump is made from stainless steel, to reduce the abrasion to seals, lengthen the machine life. Equipped with oil tank for DOP solvent used for cleaning the scrap material.

3- Main machine heating system

The main machine adopt separate aluminum heater, equipped with powerful heating bar for better heating capacity, suitable for low temperature work in winter. The temperature control system with number display, with measuring and overload protection system to control temperature exactly.

4- Hose heating system

The two hose is heated separately with latest wrapped inside heating technology, it is much more better than the traditional one, to ensure the material has best temperature and viscidity before mixing and spraying.


Main technical data

1- Max. Flux capacity: 4-8kg/min

2- Max. material temperature: 80 centigrade

3- Material output pressure: 5-10 MPa

4- Heating capacity: 9.5Kw

5- Max. hose length: 90m

6- Driving method: Pneumatic with air compressor

7- Motor power: 380V, 50/60Hz, 3Phase

8- Dimension:800x700x1250mm

9- Weight: 157Kg

10- Standard configuration: a-main machine, one set

b- Material pump, two pieces

c- Spray gun, one piece,

d- 15m heating hose, one set.