Fin Stamping Press Machine P-300/450
- Specification
I Summary
The fin forming machine is a special processing equipment for processing heat transfer fins, a key component of heat exchangers. Compact heat exchangers made up of such heat transfer fins have been used in a wide range of applications in the automotive, marine, air conditioning, compressor, construction machinery, mining machinery, aerospace, military and hydraulic oil cooling industries.
II Technical data
Model |
FP-300/450 |
|
The machine input KW |
4 KW/5.5KW |
|
Use electrical source |
Three-phase:380V50HZ |
|
Machine precision |
Up an down dies level rate |
≤0.03mm |
Machine bed hangs straight line process |
14mm |
|
The machine bed strike force |
6000KG |
|
Product Specification s |
Fins(Tooth height×Pitch) |
12×10 |
Fin maximum width |
300/452mm |
|
Fin maximum height |
12mm |
|
Fin minimum height |
1mm |
|
Fin tooth and high precision |
±0.01mm |
|
Machine processing speed |
Frequency control |
35~120time/min |
Dimension |
1400*1000*1650mm |
|
The noise sound value |
60Db(A) |
|
Main Machine weight |
1500/1800Kg |
Feeding in side Oil spray
Punching out put
I Features
1. The spindle is centered. By placing the spindle in the center position, the force transmission components can be reduced to reduce the loss during the force transmission process; at the same time, the accuracy of the machine tool can be improved.
High precision. The flatness of the extreme position of the upper and lower die tables and the flatness during the movement of the die table are higher than those of
the similar products, thus ensuring stable machine performance.
2, Automatic lubrication system. Designed with a unique automatic lubrication system to reduce machine wear.
2. Stepless adjustment. Achieve stepless adjustment, breaking through the limitations of traditional mechanical speed control gears.
5, compact structure, easy to operate. Optimize the traditional structure to make the structure more reasonable and more convenient to operate. A unique mold height mechanism has also been designed to allow one to easily debug the mold.
6, high efficiency, low power consumption, and stable performance. The improvement of precision, the reduction of wear and the optimization of structure make the overall efficiency of the machine improve and the performance is more stable. In the case of sufficient punching, the machine uses a 3KW motor, which reduces power consumption and saves costs.
7. Easy maintenance and low maintenance costs. The optimization of the structure makes the parts of the machine tool the most compact, which makes maintenance easy and maintenance cost low.
8. Structured design. The structural design allows you to change a variety of machining dies as needed to machine fins of different sizes.
Motorized Decoiller, Sensor tension control Length cutting machine (C350/C450)
Decoiller speed: 0-5000mm Servo cutter width:10-300mm
Decoiller running rate: 0-20 times/ Cutting rate:60 times/Min
Min Coil inner diameter: 150mm+/-10mm Cutting height: 0-14mm
Coil Max diameter:1400mm Air pressure: 0.5-0.8 Mpa
Coil max width:450mm Dimension: 1300*660*1300mm
Motor power: 0.75 KW Weight: 120KG
Loading weight: 1000KG PLC : Mitsubishi
Weight:120KG Touch screen :Delta
Dimension: 1050*650*1100mm
IV Price
Price Basis: FOB Shanghai, China.
Payment term: 30% deposit by T/T, the balance by T/T after inspection before shipment.
Delivery time: 45 days after receiving deposit
V Guarantee and after-sale service
We offer free training here in China. Also we can send technicians oversea for whole line installation and training. The relevant cost including Visa, insurance, round flight ticket, labor cost and accommodation should be borne by buyer.
The guarantee period is one year since the date B/L. During this period, we will offer free parts for changing if machine quality problem. Also the spare parts can be offered in original cost after that. The freight for part sending will be paid by buyer.