EN
EN

Contact Us

Email:[email protected]

Phone :+86 15962807500

Add :CBD, Nantong , JiangSu, China

  • /img/fin-punching-machine-p1410.jpg

Fin punching machine P14×10

INQUIRY

  • Specification

I Summary 

The fin forming machine is a special processing equipment for processing heat transfer fins, a key component of heat exchangers. Compact heat exchangers made up of such heat transfer fins have been used in a wide range of applications in the automotive, marine, air conditioning, compressor, construction machinery, mining machinery, aerospace, military and hydraulic oil cooling industries. 

             

II Technical data 

Model

CPJ14×10

The machine input KW

4 / 5

Use electrical source

Three-phase380V50HZ

Machine precision

Up an down dies level rate

≤0.03mm

Machine bed hangs straight line process

14mm

The machine bed strike force

6000KG

Product Specifications

FinsTooth height×Pitch

12×10

Fin maximum width

300/452mm

Fin maximum height

12mm

Fin minimum height

1

Fin tooth and high precision

±0.01mm

Machine processing speed

Frequency control

35~120time/min

Dimension

14000*1000*1650mm

The noise sound value

60Db(A)

Machine weight

 

1500/1800Kg

 

III Features 

 

1. The spindle is centered. By placing the spindle in the center position, the force transmission components can be reduced to reduce the loss during the force transmission process; at the same time, the accuracy of the machine tool can be improved.

      2. High precision. The flatness of the extreme position of the upper and lower die tables and the flatness during the movement of the die table are higher than those of the similar products, thus ensuring stable machine performance.

      3. Automatic lubrication system. Designed with a unique automatic lubrication system to reduce machine wear.

      4. Stepless adjustment. Achieve stepless adjustment, breaking through the limitations of traditional mechanical speed control gears.

      5, compact structure, easy to operate. Optimize the traditional structure to make the structure more reasonable and more convenient to operate. A unique mold height mechanism has also been designed to allow one to easily debug the mold.

      6, high efficiency, low power consumption, and stable performance. The improvement of precision, the reduction of wear and the optimization of structure make the overall efficiency of the machine improve and the performance is more stable. In the case of sufficient punching, the machine uses a 3KW motor, which reduces power consumption and saves costs.

     7. Easy maintenance and low maintenance costs. The optimization of the structure makes the parts of the machine tool the most compact, which makes maintenance easy and maintenance cost low.

     8. Structured design. The structural design allows you to change a variety of machining dies as needed to machine fins of different sizes.

 

 

Finished fin types

 

Motorized Decoiller, Sensor tension control

Decoiller speed: 0-5000mm

Decoiller running rate: 0-20 times/Min

Coil inner diameter: 150mm+/-10mm

Coil Max diameter:1400mm

Coil max width450mm

Motor power: 0.75 KW

Loading weight: 1000KG

Weight:120KG

Dimension: 1050*650*1100mm 

Feeding in side Oil spray 

 

Punching out

Length cutting machine (C450/C350)

 

Servo cutter width: 10-450mm

Cutting rate: 60 times/Min

Cutting height: 0-14mm

Air pressure: 0.5-0.8mm

Dimension: 1300*660*1300

Weight110Kg

PLC : Mitsubishi

Touch screen : Delta

 

 

INQUIRY