EN
EN

Contact Us

Email:[email protected]

Phone :+86 15962807500

Add :CBD, Nantong , JiangSu, China

  • /img/copper-tube-end-closing-machine-t-80.jpg

Copper tube end closing machine T-80

INQUIRY

  • Specification

I Summary 

The tube end spinning closing machine is used for the closing of metal pipe end, mainly used in the manufacture of air conditioners, water heaters, refrigerators, car silencers, and compressors and dryers.

II Features  

1. The workpiece is fixed by a rotating tool to rotate the seal, which can fully meet the sealing process of a long pipe of more than 1 meter.

 

2. The workpiece does not rotate during the machining process greatly improves the safety performance of the machine. By improving the clamping die, the copper tube which can not be processed by the rotating workpiece can be spun and sealed, which improves the adaptability of the machine to the product.

 

3. This equipment adopts the advantages of servo feeding, servo feeding, PLC control, simple programming, high repeatability and stable performance.

 

III Technical data 

Item 

Data 

Tube material 

Copper tube

Tube diameter range 

Max Φ50mm/Φ80mm

Working thickness 

0.6-2mm

Min Tube length 

200mm

Power 

380VAC±10%50HZ,3pahse

Air pressure 

0.5±0.1MPa

Control system 

PLC system

Loading/Unloading 

By Manual

Tube end closing shape 

Flat shape

     Mold control 

Servo motor with high precision

Clamp power 

Pneumatic power

Motor power

8Kw/10KW

Working capacity

25 Seconds (∅50)

Dimension

2200*1000*1600mm

 

IV Configuration

No

Part

Brand

Remark

1

Programmable PLC

Mitsubishi

Japan

2

Touch Screen

Mitsubishi

Japan

3

Cylinders and solenoid valves

SMC

Japan

4

Servo system

Mitsubishi

Janpan

5

switches and sensors

Autonics  / Schneider

Korea/Germany

6

electrical appliances

Siemens, Schneider

Germany

V Work flow

The principle of the spinning machine is that when the workpiece rotates at a high speed, the workpiece is pressed by a certain path through a strong external force, and the material is repeatedly pressed by the roller to make it from point to line, and the line to the surface eventually causes the workpiece to be thermally deformed. The shape you need. Depending on the required pressing force, the small spinning machine can drive the screw to generate pressure through the servo motor. Some large-scale powerful spinning machines need to be squeezed by hydraulic means.

INQUIRY