CNC Tube End Spinning Machine
Delivery terms: EXW,FCA,FAS,FOB,CFR,CIF,CPT,CIP,DAT,DAP,DDP
Payment: 30% down payment by T/T,the balance down before shipment.
Lead time: witin 10-35 days after receiving down payment.
Guarantee: within one year since date of B/L.
- Specification
The CNC tube end spinning machine is used to reduce tube end diameter size by flow forming and rolling process with automatic feeding, spinning and unloading function.
Configuration And Feature
1.1 The main frame is composed with X+Y linear rail and ball bearing screw drive system, clamping system, automatic loading and unloading system, hydraulic system, pneumatic system, lubrication system and electric control system
1.2 Equipped with storage hopper for capacity 50 pcs (Φ32mm). The loading and unloading process is driven by pneumatic cylinder with stable and smooth work.
1.3 The tube clamping system adopt high speed hollow type rotary cylinder with 4.0MPa pressure, can be suitable for different dimeter size (Ф16mm-Ф32mm) by changing clamping die. The main shaft driven by inverter motor with soft-brake, and rotating speed is adjusted by controller on operational panel.
1.4 The spinning device is the single spinning wheel design. And the spinning wheel is made from high quality material with life more than 50000 times, also lengthen the life by re-polishing and heat-treatment.
1.5 There are three tools position On X axis as spinning wheel, trimming blade and ID lathing blade. The work station will be changed one by one for tube end shrinking, end trimming and ID chamfering.
1.6 Equipped with pressure-adjustable air blowing system, and work point and duration can be set on control panel, to clean the cutting chip and cooling tube during work.
1.7 Automatic lubrication system to oiling 10ml volume each 30min. The oil tank has capacity for 100 hours work with full filling condition.
1.8 Equipped with two axis CNC controller, 8” LCD monitor, 500 unit program, automatic counter, detecting system, limited alarm system
Main Technical Data
No. |
Parameter |
Data |
|
1 |
Working Method |
Single wheel spinning / flow forming |
|
2 |
Working Station |
Shrinking + end trimming+ ID chamfering |
|
3 |
Tube Material |
Copper tube/ stainless steel tube |
|
4 |
Tube Diameter |
Φ16~Φ32mm |
|
5 |
Tube Wall Thickness Thickness |
0.7~1.2mm |
|
6 |
Tube Length |
Automatic loading |
80mm~200mm |
Manual loading |
200~250mm |
||
7 |
Shrinking ID |
Min.Φ8.1 (when diameter Φ32 x T1.2 ) |
|
8 |
Main Shaft Rotating Speed |
0~2500r/min, Stepless adjustment |
|
9 |
Main Shaft Power |
3.0Kw |
|
10 |
X Axis Stroke |
0~100mm |
|
11 |
X Axis Sspeed |
0~200mm/S |
|
12 |
X Axis Tolerance |
±0.02mm |
|
13 |
Y Axis Stroke |
0~300mm |
|
14 |
Y Axis Speed |
0~200mm/S |
|
15 |
Y Axis Tolerance |
±0.02mm |
|
18 |
Operation |
Auto /Manual / JIG |
|
19 |
Input Power |
AC 380V±10%,50/60HZ 7.5Kw |
|
20 |
Input Air Pressure |
0.5~0.8Mpa |
|
Note: Min. pressure 0.5Mpa should be ensured. |
|||
21 |
Hydraulic Pressure |
0~4.0Mpa |
|
22 |
Clamping Method |
Hydraulic cylinder + flexible clamp |
|
23 |
Productivity |
≤28 s each(,Φ32*t1.0→ID8.1 |
|
24 |
Dimension |
2300×1500×1500mm (L x W x H) |
|
25 |
Machine Weight |
1200 Kg |
Main Configuration
No. |
Name |
QTY. |
Brand |
1 |
X/Y Axis Servo Motor |
2 sets |
Mistubishi,Japan |
2 |
X/Y Axis Ball Bearing Screw |
2 pcs |
QIjian / Tian’an |
3 |
X/Y Axis Linear Rail |
Each 2 pairs |
HIWIN, Taiwan |
4 |
Ball Bearing Screw Bearing |
Each 2 pcs |
HRB |
5 |
Main Shaft Bearing (Front) |
2 pcs |
HRB |
6 |
Main Shaft Bearing (Rear) |
2 pcs |
HRB |
7 |
Main Shaft Motor |
1 pic |
Siemens |
8 |
Main Shaft Inverter |
1 pic |
INVT |
9 |
Hollow Type Rotating Cylinder |
1 set |
Aoling / KPT |
10 |
Hydraulic Pump |
1set |
YUKEN, Japan |
11 |
Hydraulic Motor |
1set |
Qunce, Taiwan |
12 |
Hydraulic Valve |
1pic |
YUKEN, Japan |
13 |
Air Valve |
1pic |
SMC, Japan |
14 |
Air Cylinder |
5 pcs |
AIRTAC, Taiwan |
15 |
Limited Switch |
6 pcs |
AUTONICS, Korea |
16 |
CNC Control System |
1set |
HUST, Taiwan |