All Categories
EN

All

High Speed Tdc Flange Roll Former

High Speed Tdc Flange Roll Former

Delivery terms:EXW, FCA, FAS, FOB, CFR, CIF, CPT, CIP, DAT, DAP, DDP

Payment:30% down payment by T/T,the balance down before shipment.

Lead time:witin 10-35 days after receiving down payment.

Guarantee:within one year since date of B/L.


  • Overview
  • Parameter
  • Inquiry
  • Related Products
Voltage: 380 V, 3 phase, 50Hz
Input: 5.5 kW
Profiling speed: 30 m/min
Steps of rollers: 22 stations
Diameter of roller shaft: 40mm
Diameter of shaft heads: 32mm
Distance between stations: 250mm
Materials of rollers: GCr15, quenched, HRC 58~62 degree, coated with rigid chrone
Shearing: following fly cutting system
Number of decoilers: standard, one
Sheet thickness : 0.4 – 1.2 mm
Weight: 3.000 kg
Dimensions (h x w x l): 6000 x 1800 x 1500 mm

tdC flange roll forming machine is mainly for manufacturing connecting flanges used in ventilation ducts. The finished flanges have many features such as high working efficiency, good sealing performance, good connecting results, etc. They are suitable for those ducts with large sections.

tdC flange roll forming machine is comprised of decoiler, main forming units and cutting system. There are two kind of cutting system, one is simple grinding wheel cutter and the other is automatic cutting with high cutting speed – 6m/min.

This series have four type: T-20,T-30, T-35, T-40.

No.ModelRolls ShapeCapacity(mm)Motor(mm)Weight(mm)Size(L.W.H)
1530201T-20

1

a=20

0.8320002800x600x1150
1530202T-30

2

a=30

1.0322003000x600x1150
1530203T-40

3

a=40

1.2430003200x600x1200
1530204T-35

4

a=35

1.0330003200x600x1200
No.ModelNameCapacity(mm)
Shape
1910191T-20DCDuct Corner2.5a=955
1910192T-30DCDuct Corner3a=1055
1910193T-40DCDuct Corner3.5a=1235
1910197LT-30Duct Corner3a=1055
1910198T-35DCDuct Corner3a=1065
1910196BC-10Duct Corner5
6
1.1Only normal fretsaw can cut the tdC flange angle. The length of flange angle should be 30mm less than each duct edge. Cutting direction should be as mentioned in the left to avoid destroying the structure  After cutting, the section should be smoothen.
1.2Insert the angle completely into the end of flanges and fixed it properly and thus the whole flange frame is formed.
1.3Install the flange frame onto the duct, from one edge to whole flange.
1.4Fix the flange frame on the duct by spot weld or nail. Fixing distance should be according to Standard DW144 table 5.
1.5Suggest to apply suitable sealant onto the inner side and outer side of whole flange and flange angle after fixing.

GET IN TOUCH

Hot categories