All Categories
EN

All

Duct Manufacture Auto-line IV

Duct Manufacture Auto-line IV

Delivery terms:EXW, FCA, FAS, FOB, CFR, CIF, CPT, CIP, DAT, DAP, DDP

Payment:30% down payment by T/T,the balance down before shipment.

Lead time:witin 10-35 days after receiving down payment.

Guarantee:within one year since date of B/L.


  • Overview
  • Parameter
  • Inquiry
  • Related Products
Electric decoiler two decoilers
One leveling & grooving roller machine: one set
Four hydraulic notching machine and dies
Hydraulic shearer: one
Duplex Pittsburgh Lock machine: one
Duplex TDF Flange Making Machine: one
Mechanical Feeding System
Transmission table: 2
Control System and software ware (English version): one set

The DUCT MANUFACTURE AUTO-LINE is the basic machine needed for a duct shop, whether used as a stand-alone machine to produce duct blanks or as the heart of a Sheet Metal Forming line.

The AUTO-LINE IV has the capacity to remove coil set, bead, and notch for two-piece or wrap duct, and cut off in a feed-to-stop shearing process. There is no minimum cut length or minimum on notch spacing.

PC-based controls ensure consistent quality of leg lengths and feeds. Single operator needed.

AUTO-LINE IV consists of a feeding metal frame, leveler grooving roll, hydraulic notch and punch machine, shearer, movable Pittsburgh lock machine, duplex trans-verse duct flange machine, tdF folder and CNC control system. The feature of AUTO-LINE IV is efficient with high performance, save space and wide capability.

Dimension of the line:24000*3500*1500/24000*3800*1500
Total Weight About 20 Tons
Coil width:up to 1250mm/1550mm
Suitable material:Galvanized or mild steel
Thickness of the sheet:0.5-1.2 mm
Cutting accuracy:±0.5mm
Forming Speed:8m/min
Electric Power:380V/3Ph/50Hz or customized
Power:about 25KW

GET IN TOUCH

Hot categories